MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before.
MultiSensor 6 is a part of Aeotec by Aeon Labs’ Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in.
You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features.
The Aeon Labs MultiSensor 6 is battery or DC powered (USB port). It comes with a bracket which allows it to be installed on a shelf, in the corner of your room, anywhere on a wall, or even in the ceiling. It's light enough to be taped to the desired surface. The device can be used outdoors with the motion sensor disabled.
|Mã sản phẩm||ZW100-A|
|Xuất xứ||Hoa Kỳ|
|Nhà sản xuất||Aeon Labs|
Use outdoor intelligence. IP20 rated, you can use MultiSensor 6 outdoors by disabling its motion sensor and usings its 5 other sensors.
Designed and calibrated to be as accurate as possible, MultiSensor 6’s six sensors are fine tuned to have accuracy variations that are as little as only ±0.2%.
An intelligent sensor that will keep getting more intelligent, you can update MultiSensor 6’s settings and firmware using wirelessly.
When run on batteries, MultiSensor 6 will send low battery warnings to your Z-Wave gateway before it’s time to change them.
MultiSensor 6 is sensitive to change. But it might be too sensitive for your needs. You can decrease or increase the sensor’s sensitivity from your Z-Wave gateway.
Every MultiSensor 6 is calibrated by our engineers for precision. And you can calibrate it too, adjusting the values of its sensors to be precise for your home, indoors and out.
It’s 2 year battery life is fantastic. But power it by cable and MultiSensor 6 can make even more accurate and more frequent sensor measurements.
Its security features are themselves secured. MultiSensor 6’s AES 128 bit wireless encryption is complemented by anti-tamper and drop sensors.
An intelligence and security sensor needs to offer reliable wireless. MultiSensor 6 does. Its fine tuned antenna means that it can communicate with other Z-Wave devices up to 150 metres / 492 feet away.